If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor
Solving navigation equations: Difference between revisions
Jump to navigation
Jump to search
m (Created page with "Category:Fundamentals") |
Carlos.Lopez (talk | contribs) No edit summary |
||
| (9 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{Article Infobox2 | |||
|Category=Fundamentals | |||
|Authors=J. Sanz Subirana, J.M. Juan Zornoza and M. Hernández-Pajares, Technical University of Catalonia, Spain. | |||
|Level=Basic | |||
|YearOfPublication=2011 | |||
|Title={{PAGENAME}} | |||
}} | |||
This article is devoted to the receiver position estimation. In particular, it is focused to: | |||
# Single frequency code based point positioning, from hereafter Standard Point Positioning <ref group="footnotes">i.e., the Standard Positioning Service.</ref> (SPP) and | |||
# Dual frequency code and carrier based Precise Point Positioning (PPP). These two topics are complemented with a brief section on Carrier Phase Ambiguity Fixing in differential and undifferenced mode. | |||
As the measurements are noisy (receiver noise, multipath) and the applied models are not perfect, adjustment and filtering techniques are needed for the parameters estimation. | |||
For more detail, please go to the following articles: | |||
:*[[Code Based Positioning (SPS)]] | |||
:*[[Kalman Filter]] | |||
:*[[Positioning Error]] | |||
:*[[Code and Carrier Based Positioning (PPP)]] | |||
:*[[Carrier Phase Ambiguity Fixing]] | |||
==Notes== | |||
<references group="footnotes"/> | |||
[[Category:Fundamentals]] | [[Category:Fundamentals]] | ||
[[Category:Solving Navigation Equations]] | |||
Latest revision as of 11:41, 23 February 2012
| Fundamentals | |
|---|---|
| Title | Solving navigation equations |
| Author(s) | J. Sanz Subirana, J.M. Juan Zornoza and M. Hernández-Pajares, Technical University of Catalonia, Spain. |
| Level | Basic |
| Year of Publication | 2011 |
This article is devoted to the receiver position estimation. In particular, it is focused to:
- Single frequency code based point positioning, from hereafter Standard Point Positioning [footnotes 1] (SPP) and
- Dual frequency code and carrier based Precise Point Positioning (PPP). These two topics are complemented with a brief section on Carrier Phase Ambiguity Fixing in differential and undifferenced mode.
As the measurements are noisy (receiver noise, multipath) and the applied models are not perfect, adjustment and filtering techniques are needed for the parameters estimation.
For more detail, please go to the following articles:
Notes
- ^ i.e., the Standard Positioning Service.