If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor
Vehicle Trackers: Difference between revisions
Rui.Pereira (talk | contribs) No edit summary |
Rui.Pereira (talk | contribs) No edit summary |
||
| Line 18: | Line 18: | ||
These devices consist usually in a box that can be tamper resistant and that is installed permanently in the vehicle. It is connected to the vehicle power supply although some device might have an internal battery that would allow them to continue to operate for a period of time after being disconnected from the vehicle power. | These devices consist usually in a box that can be tamper resistant and that is installed permanently in the vehicle. It is connected to the vehicle power supply although some device might have an internal battery that would allow them to continue to operate for a period of time after being disconnected from the vehicle power. | ||
The main component of the device is the GNSS receiver that is connected to an external antenna that is also installed permanently in the vehicle. These device incorporate also some processing and storage capability. The storage is normally used to keep a log of the collected information. In passive devices that only support wired connections or short-range wireless connections (such as Bluetooth, Wi- | The main component of the device is the GNSS receiver that is connected to an external antenna that is also installed permanently in the vehicle. These device incorporate also some processing and storage capability. The storage is normally used to keep a log of the collected information. In passive devices that only support wired connections or short-range wireless connections (such as [[Wikipedia:Bluetooth|Bluetooth]], [[Wikipedia:Wi-Fi|Wi-Fi]], [[Wikipedia:Dedicated short-range communications|DSRC]]) the upload of these logs is the only way to access the collected information. | ||
Usually these devices have wide area communication capability (usually cellular network communications) either integrated in device or accessed through the in-car communication system. Wide area communication can be used to send the position of the vehicle to a central server or service. This action can be done periodically, by user action (e.g. use panic button), upon the detection of specific conditions (e.g. airbag activation, geofencing events) or on demand from a central server or service. | Usually these devices have wide area communication capability (usually cellular network communications) either integrated in device or accessed through the in-car communication system. Wide area communication can be used to send the position of the vehicle to a central server or service. This action can be done periodically, by user action (e.g. use panic button), upon the detection of specific conditions (e.g. airbag activation, geofencing events) or on demand from a central server or service. | ||
Apart from the power, antenna connections and the Wide-Area wireless communications these devices might have additional connections for input and output of data. Possible connections in these devices are: | Apart from the power, antenna connections and the Wide-Area wireless communications these devices might have additional connections for input and output of data. Possible connections in these devices are: | ||
* '''Serial''' - Serial connections (USB or other) allow the connection of external devices or sensors and the access to the device console or storage for collection of logs and maintenance. | * '''Serial''' - Serial connections ([[Wikipedia:USB|USB]] or other) allow the connection of external devices or sensors and the access to the device console or storage for collection of logs and maintenance. | ||
* '''Car internal bus''' - Vehicle Trackers might be connected with the vehicle on-board diagnostics (OBD) or to the vehicle's CAN bus. This allows access the car's internal sensors data and on-board computer. This might even allow the issuing of specific commands to other in-car systems although this usually in only done by factory installed vehicle trackers. | * '''Car internal bus''' - Vehicle Trackers might be connected with the vehicle on-board diagnostics ([[Wikipedia:On-board diagnostics|OBD]]) or to the vehicle's [[Wikipedia:Controller area network|CAN]] bus. This allows access the car's internal sensors data and on-board computer. This might even allow the issuing of specific commands to other in-car systems although this usually in only done by factory installed vehicle trackers. | ||
* '''Short-Range Wireless''' - Bluetooth, Wi-Fi or DSRC might be support allowing the communication with other systems in the car or mobile devices. This can be usefull for communications, for the realtime sharing of the collected data (positioning and other) with other devices, for collection of sensor data from other external devices or sensors and the access to the device console or storage for collection of logs and maintenance. | * '''Short-Range Wireless''' - [[Wikipedia:Bluetooth|Bluetooth]], [[Wikipedia:Wi-Fi|Wi-Fi]] or [[Wikipedia:Dedicated short-range communications|DSRC]] might be support allowing the communication with other systems in the car or mobile devices. This can be usefull for communications, for the realtime sharing of the collected data (positioning and other) with other devices, for collection of sensor data from other external devices or sensors and the access to the device console or storage for collection of logs and maintenance. | ||
It is common that vehicle trackers don't have user input. Generally they work autonomously and sometimes the driver might not even be aware of its presence. But most of these devices allow some of user input. One of the most common types of input are panic button that can trigger distress calls as described in [[Emergency Services]]. When these devices are used for [[Work in Progress:Fleet Management and Vehicle Tracking|logistics and fleet management]] it usual that they are attached to driver consoles where the driver can register shift starts/end, fixed route used, stops, pickups and dropoffs. This console can be also used to provide messaging or warnings to the drivers. Warnings can be issued if the adequate procedures or schedule are not being followed. | It is common that vehicle trackers don't have user input. Generally they work autonomously and sometimes the driver might not even be aware of its presence. But most of these devices allow some of user input. One of the most common types of input are panic button that can trigger distress calls as described in [[Emergency Services]]. When these devices are used for [[Work in Progress:Fleet Management and Vehicle Tracking|logistics and fleet management]] it usual that they are attached to driver consoles where the driver can register shift starts/end, fixed route used, stops, pickups and dropoffs. This console can be also used to provide messaging or warnings to the drivers. Warnings can be issued if the adequate procedures or schedule are not being followed. | ||
As described for [[Emergency Services]] | As described for [[Emergency Services]] these systems tend to be factory installed and integrated with the communication and entertainment systems of the car providing localization services for all other in-car systems. In some cases these systems are also evolving towards a road vehicle black box that can be used to investigate accidents and vehicle malfunctions. | ||
== Product Characterization == | == Product Characterization == | ||
Vehicle trackers are usually application independent either because the main functionality is performed by a central server or by other in-car system while the tracker just needs to be configured or because the tracker can be programmed to support the required functionality. | |||
Some of the applications that can use vehicle trackers are: | |||
* '''[[Work in Progress:Fleet Management and Vehicle Tracking|Fleet Management]]''' | |||
* '''[[Work in Progress:Emergency Services|Emergency and Assistance Services]]''' | |||
* '''[[Tolling]]''' | |||
* '''[[Traffic Management]]''' | |||
* '''Theft Prevention and Recuperation''' | |||
== Product Examples == | == Product Examples == | ||
These systems can be factory installed or can be sold and installed as an aftermarket equipment. Depending on the application the system can be sold as a product and the application for the management of the service sold with the on-board devices. For some applications a service subject to a fee need to be subscribed for the system to be used. Usually more that one application is supported by the device and associated service. Example of such integrated services can be seen in [[Emergency Services]]. | |||
Most vehicle manufacturers provide this equipment as an optional equipment at least for some of their vehicles. Aftermarket equipment and service providers are normally local having each country specific providers. There are too many providers to list here. | |||
== Notes == | == Notes == | ||
Revision as of 23:42, 27 July 2011
| Applications | |
|---|---|
| Title | Vehicle Trackers |
| Author(s) | GMV |
| Level | Basic |
| Year of Publication | 2011 |
Vehicle Trackers are devices attached to the vehicle that track the vehicle position usually for monitoring purposes. These devices can be used for different purposes such as logistics, theft prevention or recovery, emergency services, tolling and driver behavior monitoring. Besides these applications that require little interaction with the driver these device can be connected to other systems in the vehicle. It is common that these systems can connect to other vehicle sensors in order to be able to collect additional vehicle information. Some of these device can also connect to systems such as the communication and entertainment systems to provide positioning for interactive services such as navigation.
These devices can be passive when wide area communications are not supported and the data collected in the device is analyzed at the end of the trip. Usually these devices are active and incorporate wide area communications that is used to send the collected information to a central server or service.
Product Description
Vehicle Trackers are very similar to Personal Trackers and in terms hardware and functionality. The main difference are that Vehicle Trackers are permanently attached to a vehicle and normally have at least power and antenna connections while Personal Trackers are normally smaller and standalone.
These devices consist usually in a box that can be tamper resistant and that is installed permanently in the vehicle. It is connected to the vehicle power supply although some device might have an internal battery that would allow them to continue to operate for a period of time after being disconnected from the vehicle power.
The main component of the device is the GNSS receiver that is connected to an external antenna that is also installed permanently in the vehicle. These device incorporate also some processing and storage capability. The storage is normally used to keep a log of the collected information. In passive devices that only support wired connections or short-range wireless connections (such as Bluetooth, Wi-Fi, DSRC) the upload of these logs is the only way to access the collected information.
Usually these devices have wide area communication capability (usually cellular network communications) either integrated in device or accessed through the in-car communication system. Wide area communication can be used to send the position of the vehicle to a central server or service. This action can be done periodically, by user action (e.g. use panic button), upon the detection of specific conditions (e.g. airbag activation, geofencing events) or on demand from a central server or service.
Apart from the power, antenna connections and the Wide-Area wireless communications these devices might have additional connections for input and output of data. Possible connections in these devices are:
- Serial - Serial connections (USB or other) allow the connection of external devices or sensors and the access to the device console or storage for collection of logs and maintenance.
- Car internal bus - Vehicle Trackers might be connected with the vehicle on-board diagnostics (OBD) or to the vehicle's CAN bus. This allows access the car's internal sensors data and on-board computer. This might even allow the issuing of specific commands to other in-car systems although this usually in only done by factory installed vehicle trackers.
- Short-Range Wireless - Bluetooth, Wi-Fi or DSRC might be support allowing the communication with other systems in the car or mobile devices. This can be usefull for communications, for the realtime sharing of the collected data (positioning and other) with other devices, for collection of sensor data from other external devices or sensors and the access to the device console or storage for collection of logs and maintenance.
It is common that vehicle trackers don't have user input. Generally they work autonomously and sometimes the driver might not even be aware of its presence. But most of these devices allow some of user input. One of the most common types of input are panic button that can trigger distress calls as described in Emergency Services. When these devices are used for logistics and fleet management it usual that they are attached to driver consoles where the driver can register shift starts/end, fixed route used, stops, pickups and dropoffs. This console can be also used to provide messaging or warnings to the drivers. Warnings can be issued if the adequate procedures or schedule are not being followed.
As described for Emergency Services these systems tend to be factory installed and integrated with the communication and entertainment systems of the car providing localization services for all other in-car systems. In some cases these systems are also evolving towards a road vehicle black box that can be used to investigate accidents and vehicle malfunctions.
Product Characterization
Vehicle trackers are usually application independent either because the main functionality is performed by a central server or by other in-car system while the tracker just needs to be configured or because the tracker can be programmed to support the required functionality.
Some of the applications that can use vehicle trackers are:
- Fleet Management
- Emergency and Assistance Services
- Tolling
- Traffic Management
- Theft Prevention and Recuperation
Product Examples
These systems can be factory installed or can be sold and installed as an aftermarket equipment. Depending on the application the system can be sold as a product and the application for the management of the service sold with the on-board devices. For some applications a service subject to a fee need to be subscribed for the system to be used. Usually more that one application is supported by the device and associated service. Example of such integrated services can be seen in Emergency Services.
Most vehicle manufacturers provide this equipment as an optional equipment at least for some of their vehicles. Aftermarket equipment and service providers are normally local having each country specific providers. There are too many providers to list here.
Notes