If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor

Time References in GNSS

From Navipedia
Revision as of 09:31, 17 January 2012 by Jaume.Sanz (talk | contribs)
Jump to navigation Jump to search


FundamentalsFundamentals
Title Time References in GNSS
Author(s) J. Sanz Subirana, J.M. Juan Zornoza and M. Hernández-Pajares, Technical University of Catalonia, Spain.
Level Basic
Year of Publication 2011

Regarding the GNSS, the GPS Time (GPST), GLONASS Time (GLONASST), Galileo System Time (GST) and BeiDou Time (BDT) are the reference times used in GPS, GLONASS, Galileo and Compass applications, respectively.


GPST is defined by the GPS Control segment on the basis of a set of atomic clocks aboard the satellites and in the Monitor Stations. It is synchronised with the UTC(USNO) at nanosecond level. The origin epoch of GPS time is 0h UTC (midnight) of January 5th to 6th, 1980 (6d· 0). At that epoch, the difference TAI−UTC was 19 seconds, thence GPS−UTC=n − 19s.


GLONASST is generated by the GLONASS Central Synchroniser and the difference between the UTC(SU) and GLONASST should not exceed 1 millisecond plus three hours[footnote 1] (i.e.,[math]\displaystyle{ GLONASS=UTC(SU)+3^h-\tau }[/math], where [math]\displaystyle{ |\tau|\lt 1 milisec. }[/math]).


GST will be maintained by the Galileo Central Segment and synchronised with TAI with a nominal offset below 50 ns. The GST start epoch is 0h UTC on Sunday, August 22nd, 1999 (midnight between 21 and 22 August).


BDT started at 0h UTC on January 1st, 2006 and is synchronised with UTC in [math]\displaystyle{ 100 ns }[/math] (modulo one second), [BeiDou-SIS-ICD-Test, 2011].


Notes

  1. ^ The difference between Moscow Time and Greenwich Mean Time (GMT).

References