If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor

Receiver noise

From Navipedia
Revision as of 17:59, 23 January 2012 by Jaume.Sanz (talk | contribs)
Jump to navigation Jump to search


FundamentalsFundamentals
Title Receiver noise
Author(s) J. Sanz Subirana, J.M. Juan Zornoza and M. Hernández-Pajares, Technical University of Catalonia, Spain.
Level Basic
Year of Publication 2011
Logo gAGE.png

The receiver code noise is a white-like error and can be smoothed using a low pass filter.

This error affects both the code and carrier measurements, but in different magnitude: The accuracy of pseudorange measurements is about 1% of the wavelength ("chip"), or better. This means, for instance, a noise with a maximum value of 3 m for the GPS civil C1-code (i.e., C/A-code) and about 30 cm for the protected P codes (see table 1).However, when smoothing the code with the carrier phase, the C1-code noise can be reduced down to about 50 cm.


Table 1: GPS signal structure (source: G. Seeber p. 217)

The carrier phase noise is at the level of few millimetres (about the 1% of carrier phase wavelength).

Code and carrier phase noise depends on the signal strength, which varies with the elevation angle.