Receiver noise

Fundamentals
Title	Receiver noise
Author(s)	J. Sanz Subirana, J.M. Juan Zornoza and M. Hernández-Pajares, Technical University of Catalonia, Spain.
Level	Basic
Year of Publication	2011

The receiver code noise is a white-like error and can be smoothed using a low pass filter.

This error affects both the code and carrier measurements, but in different magnitude: The accuracy of pseudorange measurements is about 1% of the wavelength ("chip"), or better. This means, for instance, a noise with a maximum value of 3 m for the GPS civil C1-code (i.e., C/A-code) and about 30 cm for the protected P codes (see table 1).However, when smoothing the code with the carrier phase, the C1-code noise can be reduced down to about 50 cm.

Table 1: GPS signal structure (source: G. Seeber p. 217)

‎

The carrier phase noise is at the level of few millimetres (about the 1% of carrier phase wavelength).

Code and carrier phase noise depends on the signal strength, which varies with the elevation angle.