If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor

Parameters adjustment for PPP: Difference between revisions

From Navipedia
Jump to navigation Jump to search
No edit summary
mNo edit summary
 
(2 intermediate revisions by 2 users not shown)
Line 4: Line 4:
|Level=Basic
|Level=Basic
|YearOfPublication=2011
|YearOfPublication=2011
|Logo=gAGE
|Title={{PAGENAME}}
|Title={{PAGENAME}}
}}
}}
Line 12: Line 11:
The following stochastic model can be used for the filter:
The following stochastic model can be used for the filter:


::* '''Carrier phase biases''' (<math>B_C</math>) are taken as "constants" along continuous phase arcs, and "white-noise"  when a cycle-slip happens (with <math>\sigma=10^4\,m</math>, for instance, after a previous carrier-code alignment), see  [[Kalman Filter]].
::* '''Carrier phase biases''' (<math>B_C</math>) are taken as "constants" along continuous phase arcs, and "white-noise"  when a cycle-slip happens (with <math>\sigma=10^4\,m</math>, for instance), see  [[Kalman Filter]].




Line 18: Line 17:




::* '''Receiver clock''' (<math>c\, \delta t</math>) is taken as a white noise process (with <math>\sigma= 3\, 10^5\; m</math>, i.e, <math>1</math> millisecond, for instance.), see  [[Kalman Filter}]].
::* '''Receiver clock''' (<math>c\, \delta t</math>) is taken as a white noise process (with <math>\sigma= 3\, 10^5\; m</math>, i.e, <math>1</math> millisecond, for instance.), see  [[Kalman Filter]].





Latest revision as of 11:37, 17 January 2016


FundamentalsFundamentals
Title Parameters adjustment for PPP
Author(s) J. Sanz Subirana, J.M. Juan Zornoza and M. Hernández-Pajares, Technical University of Catalonia, Spain.
Level Basic
Year of Publication 2011

The linear observation model [math]\displaystyle{ {\mathbf Y}={\mathbf G}\;{\mathbf X} }[/math] can be solved using Kalman Filter, considering the carrier phase bias [math]\displaystyle{ B_{C}^i }[/math] as "constants" along continuous phase arcs, and white-noise at the instants when cycle-slips occurs.


The following stochastic model can be used for the filter:

  • Carrier phase biases ([math]\displaystyle{ B_C }[/math]) are taken as "constants" along continuous phase arcs, and "white-noise" when a cycle-slip happens (with [math]\displaystyle{ \sigma=10^4\,m }[/math], for instance), see Kalman Filter.


  • Wet tropospheric delay ([math]\displaystyle{ \Delta T_{z,wet} }[/math]) is taken as a random-walk process (a process noise with [math]\displaystyle{ d\sigma^2/dt= 1\,cm^2/h }[/math], initialised with [math]\displaystyle{ \sigma^2_0=0.25\, m^2 }[/math], can be used for most of the applications), see Kalman Filter.


  • Receiver clock ([math]\displaystyle{ c\, \delta t }[/math]) is taken as a white noise process (with [math]\displaystyle{ \sigma= 3\, 10^5\; m }[/math], i.e, [math]\displaystyle{ 1 }[/math] millisecond, for instance.), see Kalman Filter.


  • Receiver coordinates ([math]\displaystyle{ dx,dy,dz }[/math])
For static positioning: the coordinates are taken as constants, see Kalman Filter.
For kinematic positioning: the coordinates are taken as white noise or a random walk process as in Kalman Filter.


This solving procedure is called to float ambiguities. Floating in the sense that they are estimated by the filter "as real numbers". The bias estimations [math]\displaystyle{ B^i }[/math] will converge into a solution after a transition time that depends on the observation geometry, model quality and data noise. In general, one must expect errors at the decimetre level in pure kinematic positioning (i.e., coordinates [math]\displaystyle{ (x,y,z) }[/math] modelled as white-noise) and at the centimetre level in static PPP.