If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor

GPS Architecture: Difference between revisions

From Navipedia
Jump to navigation Jump to search
No edit summary
 
(16 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Article Infobox2
{{Article Infobox2
|Category=GPS
|Category=GPS
|Title={{PAGENAME}}
|Editors=GMV
|Authors=GMV
|Level=Basic
|Level=Basic
|YearOfPublication=2011
|YearOfPublication=2011
|Logo=GMV
|Logo=GMV
|Title={{PAGENAME}}
}}
}}
The GPS architecture is divided into three major segments: a [[GPS Space Segment]] (SS), a [[GPS Ground Segment]] (CS), and a [[GPS User Segment]] (US).
The GPS architecture is divided into three major segments: a [[GPS Space Segment]] (SS), a [[GPS Ground Segment]] (CS), and a [[GPS User Segment]] (US).


==[[GPS Space Segment|The Space Segment]]==
==The Space Segment==
The main functions of the [[GPS Space Segment]] are to generate and transmit code and carrier phase signals with a specific signal structure, and to store and retransmit the navigation message sent by the Control Segment. These transmissions are controlled by highly stable atomic clocks on board the satellites.
The main functions of the [[GPS Space Segment]] are to transmit radio-navigation signals with a specific signal structure, and to store and retransmit the navigation message sent by the Control Segment. These transmissions are controlled by highly stable atomic clocks on board the satellites.


The GPS Space Segment is formed by a satellite constellation with enough satellites to ensure that the users will have, at least, 4 simultaneous satellites in view from any point at the Earth surface at any time.
The United States is committed to maintaining the availability of at least 24 operational GPS satellites, 95% of the time. To ensure this commitment, the Air Force has been flying 31 operational GPS satellites for the past few years.<ref name="Space">[https://www.gps.gov/systems/gps/space/ GPS Space Segment information in GPS official website]</ref>


==[[GPS Ground Segment|The Ground Segment]]==
==The Ground Segment==
The [[GPS Ground Segment]] (also referred to as Control Segment) is the responsible for the proper operation of the GPS system.  
The [[GPS Ground Segment]] (also referred to as Control Segment) is the responsible for the proper operation of the GPS system.  


The GPS Control Segment is composed by a network of Monitor Stations (MS), a Master Control Station (MCS) and the Ground Antennas (GA).  
The Ground Segment is comprised of four major subsystems: <ref name="Ground">[https://www.gps.gov/systems/gps/control/ GPS Ground Segment in GPS official website]</ref>
* Master Control Station (MCS)
* Alternate Master Control Station  
* Network of ground antennas (GAs),
* Network of globally-distributed monitor stations (MSs).


The Master Control Station (MCS) processes the measurements received by the Monitor Stations (MS) to estimate satellite orbits (ephemerides) and clock errors, among other parameters, and to generate the navigation message. These corrections and the navigation message are uploaded to the satellites through the Ground Antennas, which are co-located in four of the Monitor stations (Ascension Island, Cape Canaveral, Diego Garcia, and Kwajalein).
The Master Control Station (MCS) processes the measurements received by the Monitor Stations (MS) to estimate satellite orbits (ephemerides) and clock errors, among other parameters, and to generate the navigation message. These corrections and the navigation message are uploaded to the satellites through the Ground Antennas, which are co-located in four of the Monitor stations (Ascension Island, Cape Canaveral, Diego Garcia, and Kwajalein).


==[[GPS User Segment|The User Segment]]==
==The User Segment==
The [[GPS User Segment]] is composed by GPS receivers. Their main function is to receive GPS signals, determine pseudoranges (and other observables), and solve the navigation equations in order to obtain their coordinates and provide a very accurate time. Please refer to [[:Category:Receivers|GNSS Receivers]].
The [[GPS User Segment]] is composed by [[GPS Receivers]]. Their main function is to receive GPS signals, determine pseudoranges (and other observables), and solve the navigation equations in order to obtain their coordinates and provide a very accurate time. Please refer to [[GNSS Receivers General Introduction|GNSS Receivers]].


==Boundaries Among Segments==
==Boundaries Among Segments==
[[File:GPS_architecture.png|GPS segments|right|thumb|300px]]
[[File:GPS_architecture.png|GPS segments|right|thumb|300px]]


The communication boundaries between these three segments are documented in the Interface Control Documents (ICDs):<ref>[http://www.gps.gov/technical/icwg/ GPS Interface Control Documents ICDs]</ref>
The communication boundaries between these three segments are documented in the Interface Control Documents (ICDs):<ref>[http://www.gps.gov/technical/icwg/ GPS Interface Control Documents ICDs]</ref>
# IS-GPS-200:<ref name=" IS-GPS-200-E ">[https://www.gps.gov/technical/icwg/IS-GPS-200L.pdf  Interface Specification IS-GPS-200, Revision L]</ref> defines the requirements related to the interface between the GPS space and user segments of the GPS for radio frequency (RF) link 1 (L1) and link 2 (L2).
# IS-GPS-705):<ref name=" IS-GPS-705A ">[https://www.gps.gov/technical/icwg/IS-GPS-705G.pdf Interface Specification IS-GPS-705, Revision G]</ref> defines the requirements related to the interface between the GPS space and user segments of the GPS for radio frequency (RF) link 5 (L5).
# IS-GPS-800:<ref name"IS-GPS-800">[https://www.gps.gov/technical/icwg/IS-GPS-800G.pdf Interface Specification IS-GPS-800, Revision G]</ref> Defines the characteristics of the L1 Civil (L1C) signal transmitted from GPS satellites to navigation receivers on radio frequency link 1 (L1).
# IS-GPS-240::<ref name"IS-GPS-240">[https://www.gps.gov/technical/icwg/ICD-GPS-240C.pdf Interface Specification IS-GPS-240, Revision C]</ref> Defines the functional data transfer interface between the GPS Control Segment (CS) and the GPS user and user-support communities during the Operational Control System (OCS) / Architecture Evolution Plan (AEP) system era.
# ICD-GPS-870:<ref name=" ICD-GPS-870 ">[https://www.gps.gov/technical/icwg/ICD-GPS-870E.pdf Interface Specification ICD-GPS-870, Revision E]</ref> This ICD defines the functional data transfer interface between the GPS Next Operational Control System (OCX) and the GPS user and user-support communities; captures the same interface as ICD-GPS-240, but for the OCX era.


* IS-GPS-200:<ref name=" IS-GPS-200-E "> Interface Specification IS-GPS-200, Revision E</ref> defines the requirements related to the interface between the Space Segment (SS) of the Global Positioning System (GPS) and the navigation User Segment (US) of the GPS for radio frequency (RF) link 1 (L1) and link 2 (L2).
== Civil GPS Service Interface Committee ==
* IS-GPS-705):<ref name=" IS-GPS-705A "> Interface Specification IS-GPS-705A</ref> defines the requirements related to the interface between the Space Segment (SS) of the Global Positioning System (GPS) and the navigation User Segment (US) of the GPS for radio frequency (RF) link 5 (L5).
The Civil GPS Service Interface Committee (CGSIC) is the recognized worldwide forum for effective interaction between all civil GPS users and the U.S. GPS authorities. The U.S. Coast Guard Navigation Center (NAVCEN) coordinates and manages CGSIC in cooperation with the Department of Transportation. The Department of Transportation established CGSIC to exchange information about GPS with the civil user community, respond to the needs of civil GPS users, and integrate GPS into civil sector applications. Information from CGSIC members and meetings is provided to United States GPS authorities for consideration in GPS policy development and GPS service operation.<ref name = "CGIC">[https://www.gps.gov/cgsic/ Civil GPS Service Interface Committee in GPS official website]</ref>
* ICD-GPS-870:<ref name=" ICD-GPS-870 "> Interface Specification ICD-GPS-870 </ref> This ICD defines the interfaces between the Operational Control Segment and the GPS users.  The files provided by the Control Segment to the users are the Almanacs, Operational Advisories (OAs), Anti-Spoofing (A-S) status, and the Notice Advisory to Navstar Users (NANUs).
 
[[File:GPS_triad.png|right|thumb|300px]]
 
Besides these interface documents, the following three centers (privately referred as the Big Three or the GPS triad) provide a interface between GPS and any user, civilian or military:<ref>[http://www.pnt.gov/public/docs/2008/idmpublicsummary.pdf U. S. Positioning, Navigation, and Timing Interference Detection and Mitigation Plan Summary]</ref>
 
* '''U.S. Strategic Command GPS Operations Center (GPSOC)''': is  the Department of Defense (DoD) primary point of contact for information regarding status of GPS Precise Positioning Service (PPS) and GPS Standard Positioning Service (SPS). The GPSOC is in charge of responding to inquiries and providing information regarding the GPS constellation and the existence of space segment anomalies or issues that could result in GPS outages worldwide.
* '''U.S. Coast Guard (USCG) Navigation Center (NAVCEN)''': is the primary interface to all civil non-aviation users of GPS. It provides capabilities for question or issue resolution regarding GPS anomalies and interference reporting, to support maritime and land users with prioritized approach for safety-of-life applications.
* '''Federal Aviation Administration (FAA) National Operations Control Center (NOCC)''': Responsible for the management and resolution of all aviation reported interference. Due to the safety-of-life considerations, the FAA has well-defined procedures for dealing with the notification and coordination of any interference reports from aviation users, which includes the processing of National Airspace System (NAS) interference reports and specifically, GPS interference reports.
 


==Notes==
==Notes==
Line 49: Line 46:
<references/>
<references/>


 
[[Category:GPS|Architecture]]
[[Category:GPS]]

Latest revision as of 07:48, 30 November 2020


GPSGPS
Title GPS Architecture
Edited by GMV
Level Basic
Year of Publication 2011
Logo GMV.png

The GPS architecture is divided into three major segments: a GPS Space Segment (SS), a GPS Ground Segment (CS), and a GPS User Segment (US).

The Space Segment

The main functions of the GPS Space Segment are to transmit radio-navigation signals with a specific signal structure, and to store and retransmit the navigation message sent by the Control Segment. These transmissions are controlled by highly stable atomic clocks on board the satellites.

The United States is committed to maintaining the availability of at least 24 operational GPS satellites, 95% of the time. To ensure this commitment, the Air Force has been flying 31 operational GPS satellites for the past few years.[1]

The Ground Segment

The GPS Ground Segment (also referred to as Control Segment) is the responsible for the proper operation of the GPS system.

The Ground Segment is comprised of four major subsystems: [2]

  • Master Control Station (MCS)
  • Alternate Master Control Station
  • Network of ground antennas (GAs),
  • Network of globally-distributed monitor stations (MSs).

The Master Control Station (MCS) processes the measurements received by the Monitor Stations (MS) to estimate satellite orbits (ephemerides) and clock errors, among other parameters, and to generate the navigation message. These corrections and the navigation message are uploaded to the satellites through the Ground Antennas, which are co-located in four of the Monitor stations (Ascension Island, Cape Canaveral, Diego Garcia, and Kwajalein).

The User Segment

The GPS User Segment is composed by GPS Receivers. Their main function is to receive GPS signals, determine pseudoranges (and other observables), and solve the navigation equations in order to obtain their coordinates and provide a very accurate time. Please refer to GNSS Receivers.

Boundaries Among Segments

GPS segments

The communication boundaries between these three segments are documented in the Interface Control Documents (ICDs):[3]

  1. IS-GPS-200:[4] defines the requirements related to the interface between the GPS space and user segments of the GPS for radio frequency (RF) link 1 (L1) and link 2 (L2).
  2. IS-GPS-705):[5] defines the requirements related to the interface between the GPS space and user segments of the GPS for radio frequency (RF) link 5 (L5).
  3. IS-GPS-800:[6] Defines the characteristics of the L1 Civil (L1C) signal transmitted from GPS satellites to navigation receivers on radio frequency link 1 (L1).
  4. IS-GPS-240::[7] Defines the functional data transfer interface between the GPS Control Segment (CS) and the GPS user and user-support communities during the Operational Control System (OCS) / Architecture Evolution Plan (AEP) system era.
  5. ICD-GPS-870:[8] This ICD defines the functional data transfer interface between the GPS Next Operational Control System (OCX) and the GPS user and user-support communities; captures the same interface as ICD-GPS-240, but for the OCX era.

Civil GPS Service Interface Committee

The Civil GPS Service Interface Committee (CGSIC) is the recognized worldwide forum for effective interaction between all civil GPS users and the U.S. GPS authorities. The U.S. Coast Guard Navigation Center (NAVCEN) coordinates and manages CGSIC in cooperation with the Department of Transportation. The Department of Transportation established CGSIC to exchange information about GPS with the civil user community, respond to the needs of civil GPS users, and integrate GPS into civil sector applications. Information from CGSIC members and meetings is provided to United States GPS authorities for consideration in GPS policy development and GPS service operation.[9]

Notes

References