If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor

EGNOS User Segment: Difference between revisions

From Navipedia
Jump to navigation Jump to search
mNo edit summary
 
(23 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Article Infobox2
{{Article Infobox2
|Category=EGNOS
|Category=EGNOS
|Title={{PAGENAME}}
|Editors=GMV
|Authors=GMV.
|Level=Basic
|Level=Basic
|YearOfPublication=2011
|YearOfPublication=2011
|Logo=GMV
|Logo=GMV
|Title={{PAGENAME}}
}}
}}
The EGNOS User segment is made of EGNOS receivers that enable their users to [[Accuracy|accurately]] compute their positions with [[Integrity|integrity]].
To receive EGNOS signals, an EGNOS compatible receiver is required; they are already available on the market from a variety of manufacturers. An EGNOS receiver is like a GPS receiver but with special software inside that allows the receiver to lock onto the code used by the EGNOS satellites and compute the EGNOS corrections to the GPS signals.  An EGNOS receiver is the same size as a GPS receiver and uses the same type of antenna.<ref name=" ESA Navigation Portal">[https://egnos-user-support.essp-sas.eu/new_egnos_ops/  ESA Navigation Portal on EGNOS User Segment ]</ref>


The EGNOS User segment is made of EGNOS receivers that enable their users to accurately compute their positions.
==EGNOS Receivers and User Applications==


To receive EGNOS signals an EGNOS compatible receiver is required There are many receivers now already on the market from a variety of manufacturers. An EGNOS receiver is like a GPS receiver but with special software inside that allows the receiver to lock onto the code used by the EGNOS satellites and compute the EGNOS corrections to the GPS signals. Apart from this, an EGNOS receiver is just like a GPS receiver. This means that it can pick up GPS signals as well. An EGNOS receiver is the same size as a GPS receiver and uses the same type of antenna.<ref name=" ESA Navigation Portal">[http://egnos-portal.gsa.europa.eu/discover-egnos/programme-information/evolution   ESA Navigation Portal on EGNOS User Segment ]</ref>
The European GNSS Agency (GSA)<ref name=" European GNSS Agency (GSA)">[http://www.gsa.europa.eu/    European GNSS Agency (GSA) ]</ref> and other institutions involved in the GNSS Industry have extensively worked on the definition of communication protocols, specification and user performances for EGNOS compatible [[EGNOS Receivers | receivers]].
 
Among the endless applications within the EGNOS user segment, [[ SISNET | SISNeT]] is a remarkable technology that combines the powerful capabilities of satellite navigation and the Internet. The highly accurate navigation information that comes from the EGNOS (European Geostationary Navigation Overlay Service) Signal-In-Space (SIS) is now available over the Internet and in real time via SISNeT.<ref name=" ESA Portal on SISNeT Project">[http://www.egnos-pro.esa.int/sisnet/index.html   ESA Portal on SISNeT Project ]</ref>


==Errors Affecting User Positioning==
==Errors Affecting User Positioning==
A GNSS receiver processes the individual satellite range measurements and combines them to compute an estimate of the user position (latitude, longitude, altitude, and user
A GNSS receiver processes the individual satellite range measurements and combines them to compute an estimate of the user position (latitude, longitude, altitude, and user
clock bias) in a given geographical coordinate reference frame.
clock bias) in a given geographical coordinate reference frame.<ref name=" EGNOS SoL SDD"/>
 
The estimation of the satellite-to-user range is based on the measurement of the propagation time of the signal and a number of error sources affect the accuracy of these measurements:<ref name=" EGNOS SoL SDD">[http://www.essp-sas.eu/service_definition_documents  EGNOS Safety of Life (SoL) Service Definition Document (SDD) ]</ref>


The estimation of the satellite-to-user range is based on the measurement of the propagation time of the signal and a number of error sources affect the accuracy of these measurements:<ref name=" EGNOS SoL SDD">[http://www.essp-sas.eu/service_definition_documents EGNOS Safety of Life (SoL) Service Definition Document (SDD) ]</ref>
* Satellite clocks: any error in the synchronisation of the different satellite clocks will have a direct effect on the range measurement accuracy. These errors are similar for all users able to view a given satellite.
* Satellite clocks: any error in the synchronisation of the different satellite clocks will have a direct effect on the range measurement accuracy. These errors are similar for all users able to view a given satellite.
* Signal distortions: any failure affecting the shape of the broadcast signal may have an impact on the propagation time determination in the user receiver.
* Signal distortions: any failure affecting the shape of the broadcast signal may have an impact on the propagation time determination in the user receiver.
* Satellite position errors: if the spacecraft orbits are not properly determined by the system’s ground segment, the user will not be able to precisely establish the spacecraft location at any given point in time. This will introduce an error when computing the user position. The size of the error affecting the range measurements depends on the user’s location.
* Satellite position errors: if the spacecraft orbits are not properly determined by the system’s ground segment, the user will not be able to precisely establish the spacecraft location at any given point in time. This will introduce an error when computing the user position. The size of the error affecting the range measurements depends on the user’s location.
* Ionospheric effects: The Ionosphere is an ionized layer of the atmosphere located a few hundred kilometres above the surface of the Earth. When transiting through the ionosphere, the satellite navigation signals are perturbed, resulting in range measurement errors.
* Ionospheric effects: The ionosphere is the ionised layer of the Earth atmosphere located from around 60 kilometres to several thousand kilometres. When propagation through the ionosphere, navigation signals are disturbed, resulting in range measurement errors or reduced availability. Please refer to the article ''[[Ionospheric Delay]]'' for further information.
* Tropospheric effects: The troposphere is the lower part of the atmosphere where most weather phenomena take place. The signal propagation in this region will be affected by specific atmospheric conditions (e.g. temperature, humidity…) and will result in range measurement errors.
* Tropospheric effects: The troposphere is the lower part of the atmosphere where most weather phenomena take place. The signal propagation in this region will be affected by specific atmospheric conditions (e.g. temperature, humidity…) and will result in range measurement errors. Tropospheric effects are further described in the article ''[[Tropospheric Delay]]''.
* Reflections: When propagating towards the user receiver, navigation signals are prone to refl ections from the ground or nearby objects (buildings, vehicles...).
* Local effects: When propagating in the local environment of a user receiver, navigation signals are prone to reflections or obstructions from the ground or nearby objects (buildings, vehicles...).  
* Thermal noise, Interference and User receiver design: the navigation signals have an extremely low power level when they reach the user receiver.
* Thermal noise, interference and user receiver design: the navigation signals have an extremely low power level when they reach the user receiver.
 
When computing its position the user receiver combines the range measurements from the different satellites in view. Through this process, the individual errors affecting each range measurement are combined which results in an aggregate error in the position domain. The statistical relationship between the average range domain error and the position error is given by a factor that depends on the satellite geometry; this factor is named DOP ([[Positioning Error|Dilution Of Precision]]).


When computing its position the user receiver combines the range measurements from the different satellites in view. Through this process, the individual errors affecting each
==Credits==
range measurement are combined which results in an aggregate error in the position domain. The statistical relationship between the average range domain error and the
This article contains some verbatim extracts taken from ESA navigation web pages<ref name=" ESA Navigation Portal"/> and EGNOS SoL Service Definition Document<ref name=" EGNOS SoL SDD"/> according to the references cited.
position error is given by a factor that depends on the satellite geometry; this factor is named DOP (Dilution Of Precision).


==Notes==
==Notes==
Line 36: Line 40:
<references/>
<references/>


[[Category:EGNOS]]
[[Category:EGNOS|User]]
[[Category:EGNOS Architecture]]
[[Category:EGNOS Architecture|User]]

Latest revision as of 18:13, 29 July 2018


EGNOSEGNOS
Title EGNOS User Segment
Edited by GMV
Level Basic
Year of Publication 2011
Logo GMV.png

The EGNOS User segment is made of EGNOS receivers that enable their users to accurately compute their positions with integrity.

To receive EGNOS signals, an EGNOS compatible receiver is required; they are already available on the market from a variety of manufacturers. An EGNOS receiver is like a GPS receiver but with special software inside that allows the receiver to lock onto the code used by the EGNOS satellites and compute the EGNOS corrections to the GPS signals. An EGNOS receiver is the same size as a GPS receiver and uses the same type of antenna.[1]

EGNOS Receivers and User Applications

The European GNSS Agency (GSA)[2] and other institutions involved in the GNSS Industry have extensively worked on the definition of communication protocols, specification and user performances for EGNOS compatible receivers.

Among the endless applications within the EGNOS user segment, SISNeT is a remarkable technology that combines the powerful capabilities of satellite navigation and the Internet. The highly accurate navigation information that comes from the EGNOS (European Geostationary Navigation Overlay Service) Signal-In-Space (SIS) is now available over the Internet and in real time via SISNeT.[3]

Errors Affecting User Positioning

A GNSS receiver processes the individual satellite range measurements and combines them to compute an estimate of the user position (latitude, longitude, altitude, and user clock bias) in a given geographical coordinate reference frame.[4]

The estimation of the satellite-to-user range is based on the measurement of the propagation time of the signal and a number of error sources affect the accuracy of these measurements:[4]

  • Satellite clocks: any error in the synchronisation of the different satellite clocks will have a direct effect on the range measurement accuracy. These errors are similar for all users able to view a given satellite.
  • Signal distortions: any failure affecting the shape of the broadcast signal may have an impact on the propagation time determination in the user receiver.
  • Satellite position errors: if the spacecraft orbits are not properly determined by the system’s ground segment, the user will not be able to precisely establish the spacecraft location at any given point in time. This will introduce an error when computing the user position. The size of the error affecting the range measurements depends on the user’s location.
  • Ionospheric effects: The ionosphere is the ionised layer of the Earth atmosphere located from around 60 kilometres to several thousand kilometres. When propagation through the ionosphere, navigation signals are disturbed, resulting in range measurement errors or reduced availability. Please refer to the article Ionospheric Delay for further information.
  • Tropospheric effects: The troposphere is the lower part of the atmosphere where most weather phenomena take place. The signal propagation in this region will be affected by specific atmospheric conditions (e.g. temperature, humidity…) and will result in range measurement errors. Tropospheric effects are further described in the article Tropospheric Delay.
  • Local effects: When propagating in the local environment of a user receiver, navigation signals are prone to reflections or obstructions from the ground or nearby objects (buildings, vehicles...).
  • Thermal noise, interference and user receiver design: the navigation signals have an extremely low power level when they reach the user receiver.

When computing its position the user receiver combines the range measurements from the different satellites in view. Through this process, the individual errors affecting each range measurement are combined which results in an aggregate error in the position domain. The statistical relationship between the average range domain error and the position error is given by a factor that depends on the satellite geometry; this factor is named DOP (Dilution Of Precision).

Credits

This article contains some verbatim extracts taken from ESA navigation web pages[1] and EGNOS SoL Service Definition Document[4] according to the references cited.

Notes

References