View source for Cycle-Slips Detection with three-frequency signals

{{Article Infobox2
|Category=Fundamentals
|Authors=J. Sanz Subirana, J.M. Juan Zornoza and M. Hernández-Pajares, Technical University of Catalonia, Spain.
|Level=Basic
|YearOfPublication=2011
|Title={{PAGENAME}}
}}
The cycle-slip detection reliability can be significantly improved with three-frequency signals. Indeed, on one hand the Extra-wide-lane combination provides a several meters wavelength that dramatically improves the sensibility of this code-based detector, overcoming most of the problems mentioned in the article [[Detector based in code and carrier phase data: The Melbourne-Wübbena combination]]. On the other hand, two independent geometry free combinations are possible to generate, which allow to relay the detection in carrier-phase data detectors as those described in article [[Detector based in carrier phase data: The geometry-free combination]]

Thence, a simple scheme can based in the following elements: (1) Two carrier-phase based detectors for two independent geometry free combinations. (2) A Melbourne-Wübbena detector using the extra-wide-lane combination.

[[Category:Fundamentals]]
[[Category:GNSS Measurements and Data Preprocessing]]