Ionosphere-free Combination for Dual Frequency Receivers

Fundamentals
Title	Ionosphere-free Combination for Dual Frequency Receivers
Author(s)	J. Sanz Subirana, JM. Juan Zornoza and M. Hernandez-Pajares, University of Catalunia, Spain.
Level	Basic
Year of Publication	2011

According to the phase and code ionospheric refraction, the first order ionospheric effects on code [math]\displaystyle{ R_{P} }[/math] and carrier-phase [math]\displaystyle{ \Phi_L }[/math] measurements depends (99.9%) on the inverse of squared signal frequency [math]\displaystyle{ f }[/math].Thence, the dual-frequency receivers can eliminate its effect through a linear combination of code or carrier measurements:

[math]\displaystyle{ \Phi_{_{\mbox{iono-free}}}=\frac{f_1^2\;\Phi_{_{L_1}}-f_2^2\;\Phi_{_{L_2}}}{f_1^2-f_2^2} }[/math]

[math]\displaystyle{ R_{_{\mbox{iono-free}}}=\frac{f_1^2\;R_{_{P_1}}-f_2^2\;R_{_{P_2}}}{f_1^2-f_2^2} \qquad\mbox{(1)} }[/math]

This combination is named Ionosphere-free (see Combining Pairs of GNSS Signals).

It must be pointed out that the Precise Point Positioning uses code and carrier phase measurements in the ionosphere-free combination to remove the ionospheric refraction, because it is one of the effects more difficult to model accurately. Moreover the TGDs also cancel in this combination and are not needed (being the satellite clocks referred to the ionospheric free combination of such codes, see Combination of GNSS Measurements and Combining Pairs of Signals).