Accuracy

Fundamentals
Title	Accuracy
Author(s)	Rui Barradas Pereira
Level	Basic
Year of Publication	2011

Accuracy is the degree of conformance between the estimated or measured position and/or velocity of a platform at a given time and its true position or velocity.

Measuring Accuracy

Although being very easily understood from a conceptual point of view, the way that accuracy is measured and what is measured is not always obvious. The accuracy concept is generally used to measure the accuracy of positioning but can be also be used to measure the accuracy of velocity and even the accuracy of timming. For positioning there are 3 variants depending on the number of dimensions being considered: unidimensional accuracy (used for vertical accuracy), bidimensional accuracy (used for horizontal accuracy) and tridimensional accuracy (combining horizontal and vertical accuracy)

In literature and in system/product specifications it can be found measurements of accuracy such as CEP, rms, Percentile 67%, Percentile 95%, 1 sigma, 2 sigma. Some of these accuracy measures are averages while others are counts of distribution:

• x% Percentile (x%): Means that x% of the positions calculated have an error lower or equal to the accuracy value obtained. Typical used values are 50%, 67%, 75% and 95%. Having an accuracy of 5m (95%) means that in 95% of the time the positioning error will be equal or below 5m.

• Circular Error Probable (CEP): Percentile 50%. Means that 50% of the positions returned calculated have an error lower or equal to the accuracy value obtained.

• Root Mean Square Error (rms): The square root of the average of the squared error. This measurement is an average but assuming that the error follows guassian distribuition (which is close but not exactly true) it will correspond to the percentile 68% in unidimensional distribuitions (e.g. vertical error or timming error) and percentile 63% for bidimensional distributions (e.g. horizontal error). For the horizontal error this measurement is also refered as drms and can have variants such as 2rms or 2drms (2 times rms)

• x sigma: 1 sigma corresponds to one standard deviation and x sigma corresponds to x times 1 sigma. Assuming guassian distribuitions 1 sigma corresponds to Percentile 68% in unidimentional distribuitions and Percentile 40% for bidimentional distribuitions.

Converting between accuracy measurements

Assuming normal distribuitions these accuracy measurements can be converted between themselves. There is a correspondence between sigmas and percentiles. This correspondence can be used to convert between accuracy measurements since an accurary of 1m (1 sigma) corresponds to 2m (2 sigma) , 3m (3 sigma) and xm (x sigma).

For unidimensional distributions:

Sigma	Percentile
0,67	0,5 (CEP)
0,80	0,58 (mean error)
1	0,6827 (rms and std deviation)
1,15	0,75
1,96	0,95
2	0,9545
2,33	0,98
2,57	0,99
3	0,9973
4	0,999936
5	0,99999942
6	0,999999998

For bidimensional distributions (Rayleigh distribution) :

Sigma	Percentile
1	0,394 (std deviation)
1,18	0,5 (CEP)
1,25	0,544 (mean error)
1,414	0,632 (rms)
1,67	0,75
2	0,865
2,45	0,95 -	2,818	0,982 (2rms)
3	0,989
3,03	0,99
4	0,9997
5	0,999997
6	0,999999985