If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor

Clock Modelling: Difference between revisions

From Navipedia
Jump to navigation Jump to search
(Created page with "{{Article Infobox2 |Category=Fundamentals |Title={{PAGENAME}} |Authors= J. Sanz Subirana, JM. Juan Zornoza and M. Hernandez-Pajares, University of Catalunia, Spain. |Level=Advanc...")
 
No edit summary
Line 12: Line 12:
*'''Receiver clock offset'''(<math>\delta t_{rcv}</math>): It is estimated together with the receiver coordinates, thence no modelling is needed in this case.
*'''Receiver clock offset'''(<math>\delta t_{rcv}</math>): It is estimated together with the receiver coordinates, thence no modelling is needed in this case.


*'''Satellite clock offset''' (<math>\delta t^{sat}</math>): It can be split in two terms <ref>GLONASS satellites transmit  the <math>\Delta_{rel}</math> within the satellite clock corrections <math>\tilde{\delta t}^{sat}</math>.</ref>:
*'''Satellite clock offset''' (<math>\delta t^{sat}</math>): It can be split in two terms <ref group="footnotes">GLONASS satellites transmit  the <math>\Delta_{rel}</math> within the satellite clock corrections <math>\tilde{\delta t}^{sat}</math>.</ref>:


::::<math>
::::<math>
Line 36: Line 36:




::The accuracy of broadcasted clocks is at the order of some nanoseconds <ref> With the GPS Selective availability activated they can be degraded up to more than <math>100</math> nanoseconds.</ref>.
::The accuracy of broadcasted clocks is at the order of some nanoseconds <ref group="footnotes"> With the GPS Selective availability activated they can be degraded up to more than <math>100</math> nanoseconds.</ref>.


::The precise GPS and GLONASS satellite clocks provided by IGS are accurate at the order of <math>0.1</math> nanosecond or better <ref>Notice that <math>1</math> nanosecond of error means <math>30</math> centimetres in range.</ref>, see table 3.
::The precise GPS and GLONASS satellite clocks provided by IGS are accurate at the order of <math>0.1</math> nanosecond or better <ref group="footnotes">Notice that <math>1</math> nanosecond of error means <math>30</math> centimetres in range.</ref>, see table 3.


::::[[File:Clock_Model_Table_IGS_orbit_clock_param.png|none|thumb|400px|'''''Table 3:''''' IGS orbits and clocks products: RMS accuracy, latency and sampling (source: http://igscb.jpl.nasa.gov/components/prods.html, 2009).]]
::::[[File:Clock_Model_Table_IGS_orbit_clock_param.png|none|thumb|400px|'''''Table 3:''''' IGS orbits and clocks products: RMS accuracy, latency and sampling (source: http://igscb.jpl.nasa.gov/components/prods.html, 2009).]]
Line 56: Line 56:


For further information see [[Relativistic Clock Correction]].
For further information see [[Relativistic Clock Correction]].
==Notes==
<references group="footnotes"/>


==References==
==References==

Revision as of 14:10, 5 April 2011


FundamentalsFundamentals
Title Clock Modelling
Author(s) J. Sanz Subirana, JM. Juan Zornoza and M. Hernandez-Pajares, University of Catalunia, Spain.
Level Advanced
Year of Publication 2011
Logo gAGE.png


The clock offsets are due to clock synchronism errors referring to GNSS (GPS, GLONASS, Galileo...) time scale. The modelling of such offsets, as well as its effect on the navigation solution, is described as follows.

  • Receiver clock offset([math]\displaystyle{ \delta t_{rcv} }[/math]): It is estimated together with the receiver coordinates, thence no modelling is needed in this case.
  • Satellite clock offset ([math]\displaystyle{ \delta t^{sat} }[/math]): It can be split in two terms [footnotes 1]:
[math]\displaystyle{ \delta t^{sat}=\tilde{\delta t}^{sat}+\Delta_{rel} \qquad \mbox{(1)} }[/math]


The first term ([math]\displaystyle{ \tilde{\delta t}^{sat} }[/math]) can be calculated from values broadcasted in the navigation messages (for the Standard Point Positioning) or from the precise products available from IGS centres or other providers (see Precise Point Positioning) The second term [math]\displaystyle{ \Delta_{rel} }[/math] is small relativistic correction caused by the orbital eccentricity, (see Relativistic Clock Correction).
The broadcast navigation message provides the clock information as the coefficients of a polynomial, in a given reference epoch ([math]\displaystyle{ t_0 }[/math]) to compute the satellite clock offset as:
[math]\displaystyle{ \tilde{ \delta t}^{sat}=a_0+a_1(t-t_0)+a_2(t-t_0)^2 \qquad \mbox{(2)} }[/math]


In the case of GPS or Galileo satellites, the satellite clock offset ([math]\displaystyle{ a_0 }[/math]), clock drift ([math]\displaystyle{ a_1 }[/math]) and the clock drift rate ([math]\displaystyle{ a_2 }[/math]) for a second order polynomial (see table 1) are broadcasted.
Table 1: GPS and Galileo broadcast ephemeris and clock message parameters.


In GLONASS, as the message is updated every 1/2h, only a first order polynomial is considered, being ([math]\displaystyle{ a_0=-\tau_n }[/math]) the clock offset and ([math]\displaystyle{ a_1=\gamma_n }[/math]) the relative frequency offset, see table 2}. Note In the RINEX files the [math]\displaystyle{ -\tau_n }[/math] value is given instead of [math]\displaystyle{ \tau_n }[/math].
Table 2: GLONASS broadcast ephemeris and clock message parameters.


The accuracy of broadcasted clocks is at the order of some nanoseconds [footnotes 2].
The precise GPS and GLONASS satellite clocks provided by IGS are accurate at the order of [math]\displaystyle{ 0.1 }[/math] nanosecond or better [footnotes 3], see table 3.
Table 3: IGS orbits and clocks products: RMS accuracy, latency and sampling (source: http://igscb.jpl.nasa.gov/components/prods.html, 2009).


Figure 1 illustrates the effect of neglecting the GPS satellite clock offsets on the user position. As it is shown the satellite clocks reaches up to more than [math]\displaystyle{ 150 }[/math] kilometres, which leads to huge position errors.
Figure 1: Satellite clocks: Range and position domain effect
frameless
frameless
frameless
First row shows the horizontal (left) and vertical (right) positioning error using (blue) or not using (red) the satellite clock offsets. The variation in range is shown in the second row at left.


For further information see Relativistic Clock Correction.

Notes

  1. ^ GLONASS satellites transmit the [math]\displaystyle{ \Delta_{rel} }[/math] within the satellite clock corrections [math]\displaystyle{ \tilde{\delta t}^{sat} }[/math].
  2. ^ With the GPS Selective availability activated they can be degraded up to more than [math]\displaystyle{ 100 }[/math] nanoseconds.
  3. ^ Notice that [math]\displaystyle{ 1 }[/math] nanosecond of error means [math]\displaystyle{ 30 }[/math] centimetres in range.


References