If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor

Coordinates Computation from Almanac Data: Difference between revisions

From Navipedia
Jump to navigation Jump to search
(Created page with "{{Article Infobox2 |Category=Fundamentals |Title={{PAGENAME}} |Authors= J. Sanz Subirana, JM. Juan Zornoza and M. Hernandez-Pajares, University of Catalunia, Spain. |Level=Medium...")
 
No edit summary
Line 18: Line 18:
and
and


::<math> i=54^o+\delta i \mbox{\hspace{1cm}(GPS satellites)} </math>
::<math> i=54^o+\delta i \qquad \mbox{(GPS satellites)} </math>





Revision as of 13:43, 22 June 2011


FundamentalsFundamentals
Title Coordinates Computation from Almanac Data
Author(s) J. Sanz Subirana, JM. Juan Zornoza and M. Hernandez-Pajares, University of Catalunia, Spain.
Level Medium
Year of Publication 2011
Logo gAGE.png


The almanac data allow to compute a raw estimation of the satellites coordinates (1-2 km 1-$\sigma$ error), which is needed for signal acquisition by the receiver.

The almanac data consist of a reduced set of parameters (with respect to broadcast ephemeris), as it is shown in table 1 for GPS satellites. Similar data is broadcast for Galileo.

Thence, the same equations as in article GPS and Galileo Satellite Coordinates Computation can be used to compute the coordinates from almanac, just taking:

[math]\displaystyle{ \Delta n =C_{uc}=C_{us}=C_{rc}=C_{rs}=C_{ic}=C_{is}=0 }[/math]

and

[math]\displaystyle{ i=54^o+\delta i \qquad \mbox{(GPS satellites)} }[/math]


Table 1: GPS broadcast almanac parameters.


Notes