If you wish to contribute or participate in the discussions about articles you are invited to contact the Editor

QZSS Signal Plan: Difference between revisions

From Navipedia
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
{{Article Infobox2
{{Article Infobox2
|Category=Fundamentals
|Category=Fundamentals
|Title={{PAGENAME}}
|Authors=J.A Ávila Rodríguez, University FAF Munich, Germany.
|Authors= J.A Ávila Rodríguez, University FAF Munich, Germany.
|Level=Advanced
|Level=Advanced
|YearOfPublication=2011
|YearOfPublication=2011
|Title={{PAGENAME}}
}}
}}
QZSS and GPS have the highest level of interoperability among all the Satellite Navigation Systems as we will see in the following tables. In fact, the spectral properties are equivalent to those of [[GPS Signal Plan|GPS]]. The characteristics of the different signals in particular are summarized in detail in the following tables. For the case of the L1 band the technical characteristics of the QZSS signals are presented next:
QZSS and GPS have the highest level of interoperability among all the Satellite Navigation Systems as we will see in the following tables. In fact, the spectral properties are equivalent to those of [[GPS Signal Plan|GPS]]. The characteristics of the different signals in particular are summarized in detail in the following tables. For the case of the L1 band the technical characteristics of the QZSS signals are presented next:
Line 24: Line 24:
==References==
==References==
<references/>
<references/>
== Credits ==
The information presented in this NAVIPEDIA’s article is an extract of the PhD work performed by Dr. Jose Ángel Ávila Rodríguez in the FAF University of Munich as part of his Doctoral Thesis “On Generalized Signal Waveforms for Satellite Navigation” presented in June 2008, Munich (Germany)


[[Category:Fundamentals]]
[[Category:Fundamentals]]
[[Category:GNSS Signals]]
[[Category:GNSS Signals]]
[[Category:QZSS]]
[[Category:QZSS]]

Revision as of 09:16, 25 November 2011


FundamentalsFundamentals
Title QZSS Signal Plan
Author(s) J.A Ávila Rodríguez, University FAF Munich, Germany.
Level Advanced
Year of Publication 2011

QZSS and GPS have the highest level of interoperability among all the Satellite Navigation Systems as we will see in the following tables. In fact, the spectral properties are equivalent to those of GPS. The characteristics of the different signals in particular are summarized in detail in the following tables. For the case of the L1 band the technical characteristics of the QZSS signals are presented next:

Table 1: QZSS L1 signal technical characteristics.


Equally, for L2, L5 and E6, the technical characteristics of the QZSS signals are summarized in the following table. As we can clearly recognize, except for the LEX signal in E6, QZSS and GPS are practically identical. It is interesting to note that this signal makes use of a very interesting multiplexing scheme for its experimental LEX signal, based on Code Shift Keying (CSK) [QZSS SIS ICD][1].

Table 2: QZSS L2, L5 and E6 signal technical characteristics.


As a summary, the signal plan of QZSS is shown in the next figure:

Figure 1: QZSS planned signals.


References

  1. ^ [QZSS SIS ICD, 2007] Quasi Zenith Satellite System Navigation Service, Interface Specification for QZSS (IS-QZSS), Japan Aerospace Exploration Agency, January 22, 2007.


Credits

The information presented in this NAVIPEDIA’s article is an extract of the PhD work performed by Dr. Jose Ángel Ávila Rodríguez in the FAF University of Munich as part of his Doctoral Thesis “On Generalized Signal Waveforms for Satellite Navigation” presented in June 2008, Munich (Germany)